Controls the circulating fan in heat pump, air conditioning and forced air systems. Delay on make lets air reach proper level prior to turning on the fan. Off delay timing function continues to run the fan at the end of the heating/cooling cycle, thereby purging ducts of residual air and increasing system efficiency.

Maintains the specific conditions you have chosen for each period in your program

Input: Voltage - 18-30 VAC


Contact Ratings:

- N.O.: 20 amps

- N.C.: 10 amps



Time Delays:

- Blower ON: 7 seconds fixed

- Blower OFF: 65 seconds fixed

Input: Voltage - 18-30 VAC Contact Ratings: - 20 amps @ 240 VAC on high - 10 amps @ 240 VAC on low Time Delays: - Heat ON: 60 seconds fixed - Heat OFF: 60-240 seconds adjustable - Cool OFF: 90 seconds fixed

Icm286 Furnace Control Board Replaces Goodman Pcbbf112s B1809926s 0130f00005s

ICM offers low cost, direct wire for wire replacement fan blower controls for many popular OEM models. The fan blower controls monitors safety switches, provides on and off delays and controls the speed of the fan in heat pumps, air conditioners and forced air systems according to the logic of the original board.

Product Features
•Dual function fan delay timer
•Controls the circulating fan in heat pump, A/C and forced air systems
•OFF delay purges ducts of residual air
•ON delay allows air to reach the proper comfort level prior to energizing the fan

Furnace Control Control - replacement for OEM models including Goodman B18099-xx series control boards

Input: Voltage - 18-30 VAC Contact Ratings: - N.O.: 20 amps - N.C.: 10 amps Fixed Time Delays: - Heat ON: 75 seconds - Heat OFF: 105 seconds - Cool OFF: 90 seconds

Input:
Control: 120 or 208/240 VAC

Frequency: 50/60 Hz



Output:

- Maximum: 10 amps

- Minimum: 100 mA



Modulation: 70°-100°F

York / Evcon: 7990-319P

Furnace Control Control - replacement for Nordyne 903106-Kit control boards for use with G3, G4, G5, G6, M2 and M3 furnace modules

Spark Ignition Control Board, 18-30 Vac, 2.5" Height, 6.625 " Width 62-24140-04 - Rheem OEM Replacement Furnace Control Board

ICM282A • Low cost replacement for Carrier HK42FZ004/007/008/009/011/013/016

Furnace Control Control - replacement for OEM models including Carrier CES0110057-xx series control boards

Line Voltage Range: 98-132 VAC @ 60Hz
Cool Blower: 20A @120 VAC

Heat Blower: 20A @120 VAC

Inducer Motor: 5A @120 VAC

Cool Blower ON Delay: 1 second

Cool Blower OFF Delay: 1 second

Heat Blower ON Delay: 45 seconds

Heat Blower OFF Delay: 90, 150, 210, 270 seconds

Specification Control Voltage: Line 24V (18-30 VAC), 50/60Hz Anticipator Setting: 0.3A plus valve load @ 24VAC Prepurge: 15 seconds Trial for Ignition: 85 seconds Lockout: 60 minutes Flame Failure Response Time: 2 seconds LED: See product label for error codes Patents: - #6,222,719: Ignition Boost - #5,917,691: Fail Safe Relay Driver - #5,889,645: Energy Preservation and Transfer Mechanism - #5,930,104: PWM Relay Actuator Circuit

Control Voltage: 24 VAC (18-30 VAC), 60Hz Line Voltage: 208/230 VAC, 60Hz Timing: - Pre-Purge: 45 seconds - Trial for Ignition: 5+2 seconds - Retry Period: Every 20 seconds for 15 minutes - Lockout: Manual reset - Post-Purge: 45 seconds LED Indicators: - Red LED: Steady ON-normal operation; Flashing-fault codes Inputs: - Power: RT and C - Thermostat Interface: R,W, and G - Safety Switches: RS, LS, and CS - Combustion Motor Hall Effect Sensor Flame Sensing Outputs: - Spark - Gas Valve: GV   - Combustion Motor: CM - Blower Motor: BM - Indoor Fan Motor: IFO

ICM offers low cost, direct wire for wire replacement fan blower controls for many popular OEM models. The fan blower controls monitors safety switches, provides on and off delays and controls the speed of the fan in heat pumps, air conditioners and forced air systems according to the logic of the original board.

Product Features
•Microprocessor-based fan blower
•Inducer fan outputs
•Controls the circulation fan in gas/heat and A/C ssytems
•OFF delay purges ducts of residual air