Yellow Jacket 93398 "O" ring for gas ballast- a replacement part for current models 1.5, 4, 6, 8, and 11 CFM SuperEvac Pumps.
Made in the USA.

• Fits the 69080 Vacuum Gauge
• Made in the USA

Yellow Jacket 93366 Blank-off handle- a replacement part for current models 1.5, 4, 6, 8, and 11 CFM SuperEvac Pumps.
Made in the USA.

REPLACEMENT HOOK FOR 69047 / 69048

Yellow Jacket 93377 Intake fitting for 4 and 6 CFM (3/8" Male Flare x 3/4" NPT)- a replacement part for current models 1.5, 4, 6, 8, and 11 CFM SuperEvac Pumps. Made in the USA.

Yellow Jacket 93050 is a Coupling Spider for 93047.
Made in the USA.

Protective Boot for EVac Digital Vaccum Gauge

Yellow Jacket 93644 is a Replacement Handle for the Bullet Series Vacuum Pumps.
Made in the USA.

Yellow Jacket 93365 is the Sight Glass for the Bullet 3, 5 & 7 CFM Vacuum Pump.
Made in the USA.

Yellow Jacket 69071 Brass Connector 1/4" Female Flare X 1/4" Female Flare

Yellow Jacket 93368 Drain/Gas Ballast Plug DC, Oil Drain for the Bullet 3, 5 & 7 CFM Vacuum Pump.

Yellow Jacket 93047 Drive Coupling (Including Spider) Yellow Jacket 93047 is a Pump Drive coupling (including spider) for the Bullet 3, 5 & 7 CFM Vacuum Pump.

Yellow Jacket 93034 is a Universal Pump Leg (1) for the Bullet 3, 5 & 7 CFM Vacuum Pump.

Yellow Jacket 69067 Optional Ball Valve To Add To Sensor 1/8" NPT Female X 1/4" Female Flare

Pump Cover Gasket

Yellow Jacket 93844 Ball Valve 1/4" Sae Male Fl. X Female Fl.

Yellow Jacket 93367 Complete parts for blank-off handle- a replacement part for current models 1.5, 4, 6, 8, and 11 CFM SuperEvac Pumps. Made in the USA.

Yellow Jacket 93659 Cartridge Baffle for BULLET Vacuum Pump

Yellow Jacket 93370 Handle assembly for 4, 6, 8, 11 CFM- a replacement part for current models 1.5, 4, 6, 8, and 11 CFM SuperEvac Pumps.

Yellow Jacket 78085 2" Test Unit 0-30 Lb. Gauge 1" Pipe

2" Gauge, 0 - 60 lbs psi, 3/4" Brass threaded bell

Yellow Jacket 93115 6' long cord- a replacement part for current models 1.5, 4, 6, 8, and 11 CFM SuperEvac Pumps.

Yellow Jacket 93642 3/8", 3/8" And 1/4" Male Flare Intake Fitting

Yellow Jacket 69088 Replacement Cable (Older Internal Mount - Not Detachable) for the 69086. Non-Detachable Version for the older intenal mount version.

Yellow Jacket 93646, Bullet Cartridge Baffle for Bullet series vacuum pumps.

• 1/8" NPT Male Fitting
• Bourdon Tube Type Gauge
• Made in the USA
• Also Available in 1000-0 Millibar - See: Yellow Jacket 69045

Yellow Jacket 93387 Replacement Element screws onto the 93386 to eliminate oil mist. The Yellow Jacket 93387 is made in the USA.
Made in the USA.

Yellow Jacket 93848 Ball valve 1/2" SAE Male fl. x Female fl. When building your own charging/vacuum system, these straight flow-through valves connect hoses and provide full-flow capacity. Made in the USA.

Yellow Jacket 18975 1/4" 4-N-1 ball valve tool (for vacuum, charge, cores and recovery) with side port.

Remove and replace Schrader cores without losing charge.
• Extra 1/4" side port on 18975 to attach electronic micron vacuum gauge right at system for greater accuracy or to add refrigerant
• Evacuate and charge through an unrestricted line for increased speed and higher vacuum
• Core removal allows recovery unit to work at maximum efficiency, speeding the recovery process
• Made in the USA

Similar to the 1/4" 4-in-1 core tool but with 5/16" flare fittings. For use with R-410A systems and mini splits with larger 5/16" service ports. Remove and replace Schrader cores without losing charge.