Fieldpiece AMN2 Manometer Accessory

• The AMN2 is a manometer accessory head for use with Fieldpiece's modular multimeters (DMMs) and instruments.
• It measures gas pressure with enough resolution to measure static pressure.
• The AMN2 includes a zero adjust and the Auto Power-Off (APO) function to conserve battery life. Option to disable APO for data logging.
• The AMN2 measures pressure between -60inWC and 60inWC (inches of water column). Take static pressure measurements using the resolution mode of 0.01inWC.
• The modular design of the AMN2 gives it a distinct advantage over other manometers in the field.
• Measure and log pressure readings in hard to reach places through remoting the AMN2 with detachable test leads.
• Measure gas pressure on multiple gas appliances with the included 3/16" to 5/16" adapters.

• • Manometer Accessory - AMN2
  • 1 - 3/16" tubes with brass fitting
  • 1 - 3/16" to 5/16" tube adapter - RMA316
  • 9V battery (installed)
  • Operator's manual

How Does It Work? Use the AMN2 to measure gas pressure or static pressure. Simply connect to COM and Volts jacks on your meter using any Fieldpiece test leads with removable probe tips. For Fieldpiece "stick-style" meters, adapters and handles, slide the head directly onto the unit. Select the mVDC range on your meter. Press the ZERO Set button on the face of the AMN2. ZERO while the tube is disconnected to calibrate the meter to ambient pressure. Connect the hose to the pressure source to get the gauge pressure relative to the ambient or ZERO pressure.

Note: If you are in an environment where the temperature is noticeably changing while you are taking your reading, disconnect the meter from the hoses and ZERO it relative to ambient pressure before each reading.

WARNING: This product can expose you to chemicals which are known to the state of California to cause cancer & birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov